dmesg - Himeno Benchmark
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-43) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
Command line: BOOT_IMAGE=/vmlinuz-3.19.0-32-generic root=/dev/mapper/LinuxMint-Root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x000000001000afff] reserved
BIOS-e820: [mem 0x000000001000b000-0x00000000af0a9fff] usable
BIOS-e820: [mem 0x00000000af0aa000-0x00000000bcbfefff] reserved
BIOS-e820: [mem 0x00000000bcbff000-0x00000000bcd7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bcd7f000-0x00000000bcdfefff] ACPI data
BIOS-e820: [mem 0x00000000bcdff000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20BV001CSP/20BV001CSP, BIOS JBET53WW (1.18 ) 09/14/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23e000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00D0000000 mask 7FF0000000 uncachable
1 base 00BE000000 mask 7FFE000000 uncachable
2 base 00BD000000 mask 7FFF000000 uncachable
3 base 00BCE00000 mask 7FFFE00000 uncachable
4 base 00E0000000 mask 7FE0000000 uncachable
5 base 00C0000000 mask 7FF0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xaf0aa max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x23de00000-0x23dffffff]
[mem 0x23de00000-0x23dffffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23ddfffff]
[mem 0x220000000-0x23ddfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x0fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x0fffffff] page 2M
init_memory_mapping: [mem 0x1000b000-0xaf0a9fff]
[mem 0x1000b000-0x101fffff] page 4k
[mem 0x10200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xaeffffff] page 2M
[mem 0xaf000000-0xaf0a9fff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x33e1c000-0x35f05fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BCDFE1C0 0000F4 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: FACP 0x00000000BCDF8000 00010C (v05 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: DSDT 0x00000000BCDE3000 010F65 (v01 LENOVO TP-JB 00001180 INTL 20120711)
ACPI: FACS 0x00000000BCD68000 000040
ACPI: SLIC 0x00000000BCDFD000 000176 (v01 LENOVO TP-JB 00001180 PTEC 00000001)
ACPI: ASF! 0x00000000BCDFC000 0000A5 (v32 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: HPET 0x00000000BCDFB000 000038 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: ECDT 0x00000000BCDFA000 000052 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: APIC 0x00000000BCDF7000 000098 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: MCFG 0x00000000BCDF6000 00003C (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: SSDT 0x00000000BCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 0x00000000BCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 0x00000000BCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCDE0000 0006C9 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x00000000BCDDA000 00006E (v05 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: SSDT 0x00000000BCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: TCPA 0x00000000BCDD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x00000000BCDD7000 0006A3 (v01 Intel_ TpmTable 00001000 INTL 20120711)
ACPI: UEFI 0x00000000BCDD6000 000042 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: MSDM 0x00000000BCCB1000 000055 (v03 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: BATB 0x00000000BCDD5000 000046 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: FPDT 0x00000000BCDD4000 000064 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: UEFI 0x00000000BCDD3000 0002E2 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: DMAR 0x00000000BCDD2000 0000B0 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023dffffff]
NODE_DATA(0) allocated [mem 0x23dffa000-0x23dffefff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880235a00000-ffff88023d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x0fffffff]
node 0: [mem 0x1000b000-0xaf0a9fff]
node 0: [mem 0x100000000-0x23dffffff]
Initmem setup node 0 [mem 0x00001000-0x23dffffff]
On node 0 totalpages: 2019387
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11139 pages used for memmap
DMA32 zone: 712863 pages, LIFO batch:31
Normal zone: 20352 pages used for memmap
Normal zone: 1302528 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x10000000-0x1000afff]
PM: Registered nosave memory: [mem 0xaf0aa000-0xbcbfefff]
PM: Registered nosave memory: [mem 0xbcbff000-0xbcd7efff]
PM: Registered nosave memory: [mem 0xbcd7f000-0xbcdfefff]
PM: Registered nosave memory: [mem 0xbcdff000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88023dc00000 s86144 r8192 d32640 u262144
pcpu-alloc: s86144 r8192 d32640 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1987811
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-32-generic root=/dev/mapper/LinuxMint-Root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7833232K/8077548K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 244316K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:760 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.863 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.72 BogoMIPS (lpj=8779452)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30021 entries in 118 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000bafcc000 end: 0x000000bafe2fff
dmar: RMRR base: 0x000000bd800000 end: 0x000000bfffffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (fam: 06, model: 3d, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17558.90 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbcbff000-0xbcd7efff] (1572864 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 21:55:52, date: 03/04/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802346E8800 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802346E9000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802343C4000 000119 (v02 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xe1230000-0xe1233fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe1239000-0xe123901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe1200000-0xe121ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe123e000-0xe123efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe1234000-0xe1237fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe123d000-0xe123d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe123c000-0xe123c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe1238000-0xe12380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xe123b000-0xe123bfff 64bit]
pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1100fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff]
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xaf0aa000-0xafffffff]
e820: reserve RAM buffer [mem 0x23e000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN200e PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
system 00:06: [mem 0xc0010000-0xc001ffff] has been reserved
system 00:06: [mem 0xc0000000-0xc000ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 33704K (ffff880033e1c000 - ffff880035f06000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xab0aa000-0xaf0aa000] (64MB) mapped at [ffff8800ab0aa000-ffff8800af0a9fff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x21
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1457128552.716:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (31 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery present)
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe123d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
Error parsing PCC subspaces from PCCT
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:05: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:400:954
memory memory7: hash matches
rtc_cmos 00:02: setting system clock to 2016-03-04 21:55:53 UTC (1457128553)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[119]: starting version 204
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe123c000 port 0xe123c100 irq 44
ata2: DUMMY
ata3: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-3: new high-speed USB device number 2 using xhci_hcd
usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:dc:0a:43
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: SAMSUNG MZ7LN256HCHP-000L7, EMT03L6Q, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7LN256 3L6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
random: lvm urandom read with 29 bits of entropy available
usb 3-1: New USB device found, idVendor=8087, idProduct=8001
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 2-3: New USB device found, idVendor=17ef, idProduct=1012
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Lenovo ThinkPad Dock
usb 2-3: Manufacturer: LENOVO
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
tsc: Refined TSC clocksource calibration: 2194.918 MHz
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800, board id: 3053, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Switched to clocksource tsc
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): 6 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 8388604k swap on /dev/mapper/LinuxMint-Swap. Priority:-1 extents:1 across:8388604k SSFS
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd[500]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 4096M
checking generic (d0000000 580000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915_bpo 1.6.0 20150522 for 0000:00:02.0 on minor 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS JBET53WW (1.18 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T450, model 20BV001CSP
thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:03:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915_bpo 0000:00:02.0: registered panic notifier
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Dock Mic=0x19
sound hdaudioC1D0: Mic=0x1a
sound hdaudioC1D0: Internal Mic=0x12
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
device-mapper: multipath: version 1.7.0 loaded
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (927) killed by TERM signal
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: samba-ad-dc main process (943) terminated with status 1
init: cups main process (1032) killed by HUP signal
init: cups main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2194915979 Hz
vboxdrv: Successfully loaded version 5.0.4_LinuxMint (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
vboxguest: PCI device not found, probably running on physical hardware.
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
usb 1-3: New USB device found, idVendor=17ef, idProduct=1012
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo ThinkPad Dock
usb 1-3: Manufacturer: LENOVO
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-6: new full-speed USB device number 3 using xhci_hcd
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2897) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-6: New USB device found, idVendor=138a, idProduct=0017
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-6: SerialNumber: 0032c4ccf644
usb 1-3.4: new high-speed USB device number 4 using xhci_hcd
usb 1-3.4: New USB device found, idVendor=17ef, idProduct=1011
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Lenovo ThinkPad Dock
usb 1-3.4: Manufacturer: Lenovo
usb 1-3.4: SerialNumber: Rev1.2
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 3 ports detected
usb 1-8: new high-speed USB device number 5 using xhci_hcd
usb 1-8: New USB device found, idVendor=04f2, idProduct=b449
usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-8: Product: Integrated Camera
usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-8: SerialNumber: 0x0001
usb 1-3.4.1: new low-speed USB device number 6 using xhci_hcd
usb 1-3.4.1: New USB device found, idVendor=1241, idProduct=1503
usb 1-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.1: Product: USB Keyboard
usb 1-3.4.1: Manufacturer:
usb 1-3.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3.4.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3.4.2: new low-speed USB device number 7 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=046d, idProduct=c016
usb 1-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.2: Product: Optical USB Mouse
usb 1-3.4.2: Manufacturer: Logitech
usb 1-3.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b449)
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.0/0003:1241:1503.0001/input/input17
hid-generic 0003:1241:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-3.4.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.1/0003:1241:1503.0002/input/input18
hid-generic 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-3.4.1/input1
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.0/0003:046D:C016.0003/input/input19
hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-3.4.2/input0
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: send auth to 00:25:68:ec:4c:26 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 00:25:68:ec:4c:26 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
usb 1-2: new high-speed USB device number 8 using xhci_hcd
usb 1-2: New USB device found, idVendor=0718, idProduct=0619
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: TF10
usb 1-2: Manufacturer: TDK LoR
usb 1-2: SerialNumber: C5003B64B0CD4F59
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 3:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 7612032 512-byte logical blocks: (3.89 GB/3.62 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
systemd-hostnamed[7277]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sdb: detected capacity change from 3897360384 to 0
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
usb 1-2: USB disconnect, device number 8
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 00:25:68:ec:4c:26 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 401.556 msecs
PM: late suspend of devices complete after 19.985 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.275 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 23
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
thinkpad_acpi: EC reports that Thermal Table has changed
acpi LNXPOWER:02: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 21.073 msecs
PM: early resume of devices complete after 6.343 msecs
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
usb 1-8: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800aaf28d80
psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
PM: resume of devices complete after 2504.736 msecs
PM: Finishing wakeup.
Restarting tasks ...
usb 2-3: USB disconnect, device number 2
usb 1-3: USB disconnect, device number 2
usb 1-3.4: USB disconnect, device number 4
usb 1-3.4.1: USB disconnect, device number 6
usb 1-3.4.2: USB disconnect, device number 7
done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
init: anacron main process (16374) killed by TERM signal
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
thinkpad_acpi: docked into hotplug port replicator
usb 2-3: new SuperSpeed USB device number 3 using xhci_hcd
usb 1-3: new high-speed USB device number 9 using xhci_hcd
usb 1-3: New USB device found, idVendor=17ef, idProduct=1012
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo ThinkPad Dock
usb 1-3: Manufacturer: LENOVO
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 2-3: New USB device found, idVendor=17ef, idProduct=1012
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Lenovo ThinkPad Dock
usb 2-3: Manufacturer: LENOVO
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
thinkpad_acpi: EC reports that Thermal Table has changed
usb 1-3.4: new high-speed USB device number 10 using xhci_hcd
usb 1-3.4: New USB device found, idVendor=17ef, idProduct=1011
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Lenovo ThinkPad Dock
usb 1-3.4: Manufacturer: Lenovo
usb 1-3.4: SerialNumber: Rev1.2
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 3 ports detected
usb 1-3.4.1: new low-speed USB device number 11 using xhci_hcd
usb 1-3.4.1: New USB device found, idVendor=1241, idProduct=1503
usb 1-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.1: Product: USB Keyboard
usb 1-3.4.1: Manufacturer:
usb 1-3.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3.4.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.0/0003:1241:1503.0004/input/input20
hid-generic 0003:1241:1503.0004: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-3.4.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.1/0003:1241:1503.0005/input/input21
hid-generic 0003:1241:1503.0005: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-3.4.1/input1
usb 1-3.4.2: new low-speed USB device number 12 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=046d, idProduct=c016
usb 1-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.2: Product: Optical USB Mouse
usb 1-3.4.2: Manufacturer: Logitech
usb 1-3.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.0/0003:046D:C016.0006/input/input22
hid-generic 0003:046D:C016.0006: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-3.4.2/input0
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
usb 1-1: new high-speed USB device number 13 using xhci_hcd
usb 1-1: New USB device found, idVendor=05ac, idProduct=12a0
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iPhone
usb 1-1: Manufacturer: Apple Inc.
usb 1-1: SerialNumber: 6a9eee1394d66bd698ef8e040483cf13aad67cba
usb 1-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
upowerd[3423]: segfault at 2120 ip 00007fe7c88e0f8e sp 00007ffe8814c740 error 4 in libimobiledevice.so.4.0.1[7fe7c88d9000+1d000]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: send auth to 00:25:68:ec:4c:26 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
device wlan0 entered promiscuous mode
device wlan0 left promiscuous mode
device wlan0 entered promiscuous mode
device wlan0 left promiscuous mode
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: send auth to 00:25:68:ec:4c:26 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: send auth to 00:25:68:ec:4c:26 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
iwlwifi 0000:03:00.0: No association and the time event is over already...
wlan0: Connection to AP 00:25:68:ec:4c:26 lost
wlan0: associate with 00:25:68:ec:4c:26 (try 2/3)
wlan0: associate with 00:25:68:ec:4c:26 (try 3/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
systemd-hostnamed[24023]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
usb 1-2: new high-speed USB device number 14 using xhci_hcd
usb 1-2: New USB device found, idVendor=0718, idProduct=0619
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: TF10
usb 1-2: Manufacturer: TDK LoR
usb 1-2: SerialNumber: C5003B64B0CD4F59
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-2:1.0
scsi 4:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg1 type 0
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
sd 4:0:0:0: [sdb] 7612032 512-byte logical blocks: (3.89 GB/3.62 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
sdb: detected capacity change from 3897360384 to 0
usb 1-2: USB disconnect, device number 14
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: send auth to 00:25:68:ec:4c:26 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
ipheth 1-1:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1: USB disconnect, device number 13
ipheth 1-1:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-2: new high-speed USB device number 15 using xhci_hcd
usb 1-2: New USB device found, idVendor=0718, idProduct=0619
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: TF10
usb 1-2: Manufacturer: TDK LoR
usb 1-2: SerialNumber: C5003B64B0CD4F59
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-2:1.0
scsi 5:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 7612032 512-byte logical blocks: (3.89 GB/3.62 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdb: detected capacity change from 3897360384 to 0
usb 1-2: USB disconnect, device number 15
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
i915_bpo 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
i915_bpo 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
init: anacron main process (14274) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 00:25:68:ec:4c:26 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 559.007 msecs
PM: late suspend of devices complete after 20.000 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.310 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 23
Broke affinity for irq 44
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
thinkpad_acpi: EC reports that Thermal Table has changed
acpi LNXPOWER:02: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 21.818 msecs
PM: early resume of devices complete after 6.347 msecs
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
usb 1-8: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800aaf28d80
psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
PM: resume of devices complete after 2503.920 msecs
PM: Finishing wakeup.
Restarting tasks ...
usb 2-3: USB disconnect, device number 3
usb 1-3: USB disconnect, device number 9
usb 1-3.4: USB disconnect, device number 10
usb 1-3.4.1: USB disconnect, device number 11
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
done.
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
usb 1-3.4.2: USB disconnect, device number 12
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
init: anacron main process (14786) killed by TERM signal
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: send auth to 00:25:68:ec:4c:26 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
init: anacron main process (25055) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 00:25:68:ec:4c:26 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 389.621 msecs
PM: late suspend of devices complete after 19.473 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.300 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 23
Broke affinity for irq 44
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
thinkpad_acpi: EC reports that Thermal Table has changed
acpi LNXPOWER:02: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 20.735 msecs
PM: early resume of devices complete after 5.464 msecs
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
usb 1-8: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800aaf28d80
PM: resume of devices complete after 609.139 msecs
PM: Finishing wakeup.
Restarting tasks ...
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
done.
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
usb 1-3: new high-speed USB device number 16 using xhci_hcd
usb 2-3: New USB device found, idVendor=17ef, idProduct=1012
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Lenovo ThinkPad Dock
usb 2-3: Manufacturer: LENOVO
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 1-3: New USB device found, idVendor=17ef, idProduct=1012
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo ThinkPad Dock
usb 1-3: Manufacturer: LENOVO
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-3.4: new high-speed USB device number 17 using xhci_hcd
usb 1-3.4: New USB device found, idVendor=17ef, idProduct=1011
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Lenovo ThinkPad Dock
usb 1-3.4: Manufacturer: Lenovo
usb 1-3.4: SerialNumber: Rev1.2
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 3 ports detected
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4a90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802328c4ad8
usb 1-3.4.1: new low-speed USB device number 18 using xhci_hcd
usb 1-3.4.1: New USB device found, idVendor=1241, idProduct=1503
usb 1-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.1: Product: USB Keyboard
usb 1-3.4.1: Manufacturer:
usb 1-3.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3.4.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.0/0003:1241:1503.0007/input/input23
hid-generic 0003:1241:1503.0007: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-3.4.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.1/0003:1241:1503.0008/input/input24
hid-generic 0003:1241:1503.0008: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-3.4.1/input1
usb 1-3.4.2: new low-speed USB device number 19 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=046d, idProduct=c016
usb 1-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4.2: Product: Optical USB Mouse
usb 1-3.4.2: Manufacturer: Logitech
usb 1-3.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.0/0003:046D:C016.0009/input/input25
hid-generic 0003:046D:C016.0009: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-3.4.2/input0
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
wlan0: authenticate with 00:25:68:ec:4c:26
wlan0: send auth to 00:25:68:ec:4c:26 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:25:68:ec:4c:26 (try 1/3)
wlan0: RX AssocResp from 00:25:68:ec:4c:26 (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:25:68:ec:4c:26
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 4 with no TDs queued?
[drm:gen8_irq_handler [i915_bpo]] *ERROR* The master control interrupt lied (SDE)!